If you hit the eject button and you only hear a clicking sound there might be a small problem with the ejecting mechanism.
Remove the display of the ACC, slide forward the EHU and disconnect the CD player. Remove the CD player (you can have a look in this instruction)
![]() |
Remove the two screws from the top cover. |
![]() |
Remove the screw from the backside. |
![]() |
Remove the screws on both sides from the faceplate.. |
|
Release the clips and remove the faceplate.. |
![]() |
Remove the top cover of the CD player.. |
![]() |
Remove the 4 screws holding the CD mechanism ( 2 frontside, 2 top side) |
![]() |
Remove the mechanism from the housing. Take care not to damage the ribbon cable. |
![]() |
Next to the gears there is a small screw. This screw is holding the gearbox. The picture does not show this very well but you will find a broken piece of plastic of the top cover of the gearbox. |
![]() |
Remove the screw and the broken part.. |
![]() |
Prepare a thin metall piece (f.e. from a tinned can) and drill a small hole in it. Bend it 90 degrees as in the example at the left side. |
![]() |
Fix the metall strip with the original screw. Add some 2 component glue and bend the strip over the top of the gearbox. Take care, it might be nescessary to line up the gears before fixing the metall strip. |
Reassemble the CD player in reverse order and put it back in the car. |